Royqueen MR706 Tablet Firmware Download Link

20:21:00 ansary 17 Comments A⁺ a^-

After finish Flashing using Sp Flash Tool

DOWNLOAD HERE:

Royqueen MR706 Tablet Firmware
Password:sharethetrick

Board ID : MR706

CPU : MT8312V

Boot Mode

Volume down and insert usb cable

Do the flashing of firmware if performing a hard reset using hardware keys not solving your problem.Before we do that flashing of Firmware, here's How to Hard Reset Royqueen MR706 Tablet.

Make sure your battery have at least 60 percent charge,and you have already back-up your important data.Because by doing this all important data save in your tablet will completely wiped-out.

1.Turn Off Tablet

2.Hold and Press Volume up and Power button to go to Android system Recovery

3.When in recovery use Volume down to select wipe data/factory reset,Enter it by pressing Power Button.

4.Select Yes-delete all user data and confirm by clicking power button.

5.After finish format,Reboot System

6.Follow on screen to continue using tablet.

That's It.

When Performing Hard Reset not solving the problem,Then we Proceed to Flashing a new Firmware in your Tablet.Here's How:

1.Open Flash Tool, click Scatter-loading then locate MT6582_Android_scatter file, then click open

2.Click Firmware Upgrade and then boot the tablet, tablet must be totally off, press volume down in tablet and insert usb cable, once detected, install driver, retry if failed untill it will automatically flash
3.Wait until complete flashing(you can see a window with green circle)

4.Remove USB in the Tablet,If you completely Power your tablet,Congrats you do it correctly.

Credits to the uploader of this Firmware rp_yonex of gsmsandwich.

17 comments

Write comments

Unknown

AUTHOR

7 January 2015 at 00:51 delete

password plz

ansary

7 January 2015 at 08:08 delete

post updated

Anonymous

14 May 2015 at 08:43 delete

Hello Ansary, I have the same board model (ELINK_MR706_D3_V6) with a A9 Dual Core @1.2 GHZ (1GB DDR3 - 8GB ROM), 3G Dual Sim. I did a wrong firmware update and now I need to proceed with the SD card method. Do you have any way to turn the .img files into .ius? or just img? Thanks a lot.

14 May 2015 at 09:47 delete

download firmware above and follow instructions above.
hope will help you!

14 May 2015 at 10:14 delete

It won't work since my computer does not recognize it :( the only way I can make it to work is by sd card booting. Do you know which other model could work for this board?

14 May 2015 at 10:16 delete

It's a MT8312, A9 @1.2 GHZ, 1024x600 7 inches. 3G DUALSIM support.

14 May 2015 at 10:31 delete

YOU MUST FOLLOW THIS

Boot Mode

"Volume down and insert usb cable''

HOLD THAT BEFORE CONNECTING YOUR DEVICE TO PC!

rana g mobiles

8 October 2015 at 22:34 delete

after flash with this file tab display is small
not on full sacreen

23 October 2015 at 15:51 delete

work on board MR706D but not on full screen

31 October 2015 at 20:52 delete

DOES this work with
MT83X2_MR706_MR7063H1C2W1.20140315
thanx

23 November 2015 at 16:08 delete

thank you

ABDULSALAM

30 March 2016 at 18:52 delete

I have IKON TPC-783 Tablet, I would like to update the firmware. could you tell me which firmware is suitable for this model?

currently running firmware:

Build number: MT83X2_MR706_MR7063L1C2W1.2104031418

CUSTOM BUILD VERSION:
1.19_20140125

PLEASE ADVISE

10 April 2016 at 00:40 delete

Tahir

21 July 2016 at 02:02 delete

hello how are you dear,
i have a tablet ismart china tablet. Model is i-tab79g8.
i flash this tab whith sp flash tool. i cannot make a backup old files.
i download a scatter file http://www.needrom.com/download/mt102w-mt8312/
this scatter was install success. but when power on the device screen lights on but no display on lcd.
i am so worry please help me.
some additional information hear.
SP. Flash tool information.
Chip Name: MT6582_s01
Chip version: 0x0000ca01
Ext clock: EXT_26M
RAM Type: DRAM
so when i open back cover i see
bord number : K733 B1-1 20140329
processor: MEDIATEK ARM MT8312 V 1421-XAHHTH CTT3P551
PLEASE HELP ME