How To Flash Cherry Mobile Fusion Storm to Stock Firmware Using Actions Pad End User Upgrade V1.01

15:50:00 14 Comments A+ a-


This tutorial will guide the step by steps that you should follow on How to Flash Cherry Mobile Fusion Storm to Stock Firmware Using Actions Pad End User Upgrade V1.01.Flash new firmware in your tablet if you encountered hang in logo or anything that could not fix by performing a Hard Reset.Just follow below step by steps guide to fix the problem.

How To Flash Cherry Mobile Fusion Storm to Stock Firmware Using Actions Pad End User Upgrade V1.01

1.Download and Extract Pad Firmware Upgrade Tool
2.Install Set-up.exe
3.Click Next and wait until complete installation



4.After Finish Installing,Go to Drive C>Program Files>Actions>Pad Firmware Upgrade>Product and Double click to open Pad Firmware Upgrade.
5.Now Click what shown in image and browse for Cherry_Fusion Storm_V1_20131029.fw
6.Press Upgrade
7.Power-Off Tablet and Connect to USB while pressing Volume up and down

8.Flashing now will start and wait until finish!

9.After successful flash,remove from USB and turn-on the tablet

Note:The first boot will take longer minutes,just wait!

Things to Remember .

Do not disconnect your tablet during flashing process. Charge your tablet more then 60% before flashing. Power failure during flashing may result dead tablet.

Note :- The above mention method was tested and find 100% working with Cherry Mobile Fusion Storm  tablet. However I did not find any trouble or difficulty during the flashing process but I do not take any responsibility.

Important File To Be Download:

Cherry Mobile Fusion Storm Stock Firmware
Pad Firmware Upgrade Tool

That's It Very Easy!

Something Wrong in my Post?Feel Free to comment Below!

Don't Forget to Like us on Facebook or Subscribe to us via E-mail

14 comments

Write comments
Unknown
AUTHOR
9 January 2015 at 00:01 delete

is it possible tp flash novo8 or KItkat using pad end user upgrade?

Reply
avatar
ansary
AUTHOR
9 January 2015 at 07:46 delete

yes it is possible

Reply
avatar
Anonymous
AUTHOR
12 January 2015 at 13:55 delete

the fw is corrupted file..i cant use it

Reply
avatar
Anonymous
AUTHOR
12 January 2015 at 15:16 delete

It cannot detect my fusion device..as I check my computer it is not recognized

Reply
avatar
ansary
AUTHOR
12 January 2015 at 15:48 delete

Hold Volume down or Volume Up while connecting tab to pc using micro USB cable

Reply
avatar
Unknown
AUTHOR
12 March 2015 at 11:25 delete

sir panu po i program ung fussion storm n rooted ng ainol? d rin kasi madetect ng pc
pag inopen q ainol lng lumilitaw tas wala n ganun nlng xah...

Reply
avatar
Unknown
AUTHOR
21 September 2015 at 20:05 delete

broken link po, may iba pa po ba kayong link?

Reply
avatar
Anonymus
AUTHOR
31 October 2015 at 20:29 delete

https://drive.google.com/file/d/0B-H1qJIv2txNcTBtdXd1bS1xR3c/edit heto po sa pad product tool!

Reply
avatar
Unknown
AUTHOR
5 September 2016 at 13:31 delete

hello how can i open my cherry mobile tablet fusion storm,it stock on a logo when im opening it and i cant close it..please help me,its always at the logo mode

Reply
avatar
Unknown
AUTHOR
5 September 2016 at 13:34 delete

also my laptop cant recognized my tab

Reply
avatar
Unknown
AUTHOR
5 September 2016 at 14:09 delete

bkt po hndi maiscan sa viruses?

Reply
avatar
dartblade
AUTHOR
18 February 2017 at 17:07 delete

brokenlink na Cherry Mobile Fusion Storm Stock Firmware

Reply
avatar
Anonymous
AUTHOR
6 May 2017 at 19:21 delete

pa update po ng link... tnx

Reply
avatar