Cherry Mobile Pearl Firmware Download Link

08:28:00 11 Comments A+ a-

You need this firmware/stock rom if you have encountered this kind of problem in your phone.Listed Below

1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC

Downloads:
VCom Drivers
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.

Installing Drivers

First thing first,Before you can flash/install rom in your phone you must secure first that your phone is detected in your PC.

If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.
The drivers will automatically installed in your PC.

If You using  Window XP
Connect your phone in PC using Micro USB Cable in turn-off mode while pressing Volume Up or Volume Down.This will detect and look for the driver.
 1. This is the first time that you will connect your phone and it will search for the correct driver. 
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.



Flashing/Install new Firmware/Stock ROM

1.Open Sp Flash tool

2.Click Scatter-loading and browse for MT6572_Android_scatter
3.Now,Click Download and connect your phone while power off.
4.When successfully connected the progress bar will run and change it colors and wait until you dialog window saying Download Ok.

Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
Load the scatter file
Click in Format (a new menu will popup)
Make sure that you select Format whole flash except bootloader then press OK
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
It should detect your phone and continue to flash.
Then Click Download to fully flash your phone.
Hard Reset your phone after flashing.
In Latest version of Flashtool
Load the scatter file
Choose Format + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing

For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.

Don't Forget to like us on Facebook and Follow us on Google+

11 comments

Write comments
Unknown
AUTHOR
13 April 2015 at 08:01 delete

Problem Solved...Thank You....

Reply
avatar
Unknown
AUTHOR
29 August 2015 at 17:36 delete

bakit wala yung "Cache" at "USRDATA" ! -_-

Reply
avatar
Unknown
AUTHOR
7 January 2016 at 08:10 delete

pahingi ng link po!!



Reply
avatar
ansary
AUTHOR
7 January 2016 at 08:37 delete

The link has been updated

Thanks for dropping by!!!

Reply
avatar
a
AUTHOR
25 August 2016 at 16:32 delete

Sir wala na ung VCOM Driver ?
di kasi ma detect phone ko eh.. thanks/

Reply
avatar
Unknown
AUTHOR
20 December 2016 at 12:23 delete

gagana ba ito sa neo 5 16gb lollipop?

Reply
avatar
Unknown
AUTHOR
8 May 2017 at 05:43 delete

Sir, S_DL_GET_DRAM_SETTING_FAIL(0x13BE)
po ang lumalabas tinry ko na po lahat ng option

Reply
avatar
Unknown
AUTHOR
16 June 2017 at 02:56 delete

kamusta po sir meron po ba paraan para maayos ung cherry mobile superion 3g ko black screen po siya pero kapag inopen ko may tunog po slamat po

Reply
avatar
Anonymous
AUTHOR
6 August 2017 at 04:34 delete

pano fix errors:

BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)

scatter storage type is HW_STORAGE_EMMC
target storage type is HW_STORAGE_NONE

Reply
avatar
Unknown
AUTHOR
11 December 2017 at 16:38 delete

sir hndi po madownload blank lang po ung links

Reply
avatar
23 January 2018 at 08:03 delete

BOSS DIKO PA NA TRY TO KASO TATRY KOPALANG V2 BATO?
AYOS NAMAN CELLPHONE KO NA DEDETECT PA SANA GUMANA TO
DEADBOT KASI CP KO E BTW SALAMAT DITO SANA GUMANA

Reply
avatar