O+ 8.38 Firmware Download LInk

09:26:00 56 Comments A+ a-

You need this firmware/stock rom if you have encountered this kind of problem in your phone.Listed Below

1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC

Some firmware files may be zipped. Please use either WinRAR or 7-Zip to extract. If a firmware file has been divided into multiple parts, use either program to combine into a single file.


Downloads:
VCom Drivers
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.

Installing Drivers

First thing first,Before you can flash/install rom in your phone you must secure first that your phone is detected in your PC.


If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.
The drivers will automatically installed in your PC.

If You using  Window XP
Connect your phone in PC using Micro USB Cable in turn-off mode while pressing Volume Up or Volume Down.This will detect and look for the driver.
 1. This is the first time that you will connect your phone and it will search for the correct driver. 
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.





Flashing/Install new Firmware/Stock ROM

1.Open Sp Flash tool



2.Click Scatter-loading and browse for MT6572_Android_scatter
3.Now,Click Download and connect your phone while power off.
4.When successfully connected the progress bar will run and change it colors and wait until you dialog window saying Download Ok.

Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
Load the scatter file
Click in Format (a new menu will popup)
Make sure that you select Format whole flash except bootloader then press OK
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
It should detect your phone and continue to flash.
Then Click Download to fully flash your phone.
Hard Reset your phone after flashing.
In Latest version of Flashtool
Load the scatter file
Choose Format + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing

For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.

Don't Forget to like us on Facebook and Follow us on Google+

56 comments

Write comments
Jamz Android
AUTHOR
28 October 2015 at 10:53 delete

Mine will say PT_ROM change must be downloaded or something..... is that a problem

Reply
avatar
Dan Galman
AUTHOR
28 November 2015 at 20:22 delete

Hi, please help. I finished flashing it but when I opened the device it got stuck on the boot logo. Please help me, thank you.

Reply
avatar
Geobert Magos
AUTHOR
3 February 2016 at 22:48 delete

pahinge po password, thanks!

Reply
avatar
Geobert Magos
AUTHOR
3 February 2016 at 22:49 delete

pahinge po password, thanks!

geobert18@gmail.com

Reply
avatar
14 February 2016 at 21:54 delete

hi sir ano po yong password?

gilmer.miranda69@gmail.com

Reply
avatar
15 February 2016 at 13:42 delete

ayaw na maopen yung phone sir

Reply
avatar
27 March 2016 at 22:24 delete

ganun din nang yare sa Akin

Reply
avatar
27 March 2016 at 22:37 delete

sir help naman before sone flash pag bukas ko hang logo na sha ?? why

Reply
avatar
said zer
AUTHOR
28 March 2016 at 20:59 delete

hi sir ano po yong password?
zer1965@gmail.com

Reply
avatar
11 April 2016 at 09:48 delete

May pass pala . pence nmn po

Reply
avatar
Ronie Ercilla
AUTHOR
13 April 2016 at 09:25 delete

hang din sa logo sakin after flashing. help naman.

Reply
avatar
Ronie Ercilla
AUTHOR
13 April 2016 at 09:39 delete

ako din hang sa boot logo after flashing. na-solve na ba problema niyo?

Reply
avatar
Jr Valencia
AUTHOR
13 April 2016 at 09:53 delete

sakin din pre hanggang logo lang sya, ano na ginawa mo

Reply
avatar
13 April 2016 at 12:57 delete

try po hard reset after finish flashing!

Reply
avatar
Jr Valencia
AUTHOR
13 April 2016 at 14:04 delete

di po ako makapunta ng recovery, pano po ba?

Reply
avatar
Jr Valencia
AUTHOR
13 April 2016 at 14:08 delete

nag hard reset napo ako, pero ganun padin, ano po sir pwede kong gawin pa?

Reply
avatar
13 April 2016 at 16:03 delete

need mo na po hanap ibang firmware di compatible ang firmware ko

salamat po!

Reply
avatar
anil chawla
AUTHOR
15 April 2016 at 20:44 delete

what is the password
of zip

Reply
avatar
18 April 2016 at 10:47 delete

bat ganon same kami lahat ng naging problema nag hang na sa logo after ma flash gamit yan. di mo man lang kami masagot kung ano pwede solusyon.

Reply
avatar
18 April 2016 at 14:20 delete

I'm uploading new file this might help!!!

Just stay tune!!!!

Reply
avatar
21 April 2016 at 09:28 delete

Download this O+ 8.38 Firmware Tested instead of the other one!!!

Reply
avatar
Anonymous
AUTHOR
22 April 2016 at 10:30 delete

Hi sir, Tried the new firmware,it works great.. but meron po new problem, after flashing humina un signal ng unit sir.. pano kaya maayos un? Thank you!

Reply
avatar
24 April 2016 at 18:11 delete

Sayo humina? Akin nawala! May fix na ba?

Reply
avatar
9 May 2016 at 11:38 delete

Wala ko naencounter na prob wala din hinihingi na password at mga 1min lng sa logo tpos ok na.
Thanks guys

Reply
avatar
17 May 2016 at 14:51 delete

sa akin nawala ang sim card management. No sim card detected at na-disable ang sim card management. Help please.

Reply
avatar
Ariel Ponting
AUTHOR
20 May 2016 at 20:03 delete

sir pwede magpaturo kung pano makuuha yung firmware sa phone? thanks.

currently downloading the tested firmware. hang on logo yung isang firmware. thanks for sharing!

Reply
avatar
osborn
AUTHOR
4 June 2016 at 23:54 delete

hi what will i do to my phone after flashing, only oplus logo..thank you in advance.

Reply
avatar
15 July 2016 at 03:11 delete

password lapasaran.larry@yahoo.com

Reply
avatar
15 July 2016 at 03:12 delete

please send a password..sir salamat..advance..

Reply
avatar
15 July 2016 at 08:33 delete

Download this O+ 8.38 Firmware Tested instead of the other one!!! - See more at: http://www.sharethetrick.com/2015/06/o-838-firmware-download-link.html?showComment=1468523548118#c2697459091113530869

Reply
avatar
24 July 2016 at 00:16 delete

Dude remove the other link its kinda confusing i accidentally downloaded the damage one.. great work tho

Reply
avatar
7 August 2016 at 13:56 delete

password please iml.eco.park@gmail.com

Reply
avatar
chris nungay
AUTHOR
11 August 2016 at 18:55 delete

anu ba ang password... kryss_082390@yahoo.com

Reply
avatar
Edwin barawel
AUTHOR
16 August 2016 at 17:30 delete

nawala yung signal pano yan?

Reply
avatar
31 August 2016 at 15:21 delete

wala naman downloadable na firmware para sa o plus 8.38 sa link na binigay nyo

Reply
avatar
31 August 2016 at 17:27 delete

Pa-click po yong O+ 8.38 firmware para mapunta ka sa download link!!!!

Reply
avatar
22 September 2016 at 08:38 delete

Sir. Ano po ung working na firmware? Ung nasa tutorial section or sa comment section. Thanks!

Reply
avatar
edwin sinoro
AUTHOR
2 October 2016 at 19:48 delete

pasend naman sakin ng password pplease kung meron downloading na sya ngayon edwinsinoro@yahoo.com yan yun email ko sir

Reply
avatar
Toottoot
AUTHOR
11 October 2016 at 14:08 delete

Pasend po ng password. sarahmaeparala@gmail.com. Thankyou

Reply
avatar
Toottoot
AUTHOR
11 October 2016 at 14:17 delete

Pasend po ng password. sarahmaeparala@gmail.com. Thankyou

Reply
avatar
Ozwin Romeo
AUTHOR
17 October 2016 at 17:35 delete

pASSword po? tnx ozwinromeo@gmail.com

Reply
avatar
21 November 2016 at 07:54 delete

sir ko din pwede malama pssword. email at olracanegaras@gmail.com.

Thanks in advance

Reply
avatar
kim
AUTHOR
22 June 2017 at 12:14 delete

Sr ang passWord po thx

Reply
avatar
Anonymous
AUTHOR
31 August 2017 at 12:41 delete

SP FLASH TOOLS

The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user.

Reply
avatar
31 August 2017 at 13:23 delete

still working i just check it right now!

Reply
avatar
alfred
AUTHOR
30 September 2017 at 14:43 delete

Sir author phingi nmn po ng password sa stockrom.. pkisend nlng po sa email ko:

jam24ph@gmail.com

Thank you po..

Reply
avatar
alfred
AUTHOR
30 September 2017 at 14:45 delete

Sir author phingi nmn po ng password sa stockrom.. pkisend nlng po sa email ko:

jam24ph@gmail.com

Thank you po..

Reply
avatar
Unknown
AUTHOR
9 May 2018 at 06:42 delete

sir pano po ma fix deadboot pero detected s pc?

Reply
avatar
Anonymous
AUTHOR
29 August 2018 at 22:42 delete

GANITO DIN NANGYARI SAKIN DEADBOOT PERO DETECTED SA PC 3 FIRMWARE NA NASUBUKAN KO YUNG V8.0.3 V8.0.5 PATI V8.0.7 WALANG PAGASA MA AYOS

Reply
avatar