OPPO R9 Plus, R9 and F1s Android 6.0 Marshmallow Firmware Download Link

19:01:00 0 Comments A+ a-

OPPO has just announce that a software to Android 6.0 Marshmallow is now available to be downloaded and installed. An extra benefit to upgrading to the latest version of the ColorOS is that it will allow the OPPO R9 Plus and R9 to have a dual-sim function with 4G+3G compatibility.


Download:


R9 Plus

http://downloads.oppo.com.s3.amazonaws.com/firmware/X9079%206.0/X9079EX_11_OTA_001_all_201703111638_wipe.zip

R9

http://downloads.oppo.com.s3.amazonaws.com/firmware/X9009%206.0/X9009EX_11_OTA_001_all_201703281711_wipe.zip

F1s

http://downloads.oppo.com.s3.amazonaws.com/firmware/A1601%206.0/A1601EX_11_OTA_001_all_201703281552_wipe.zip

Below are the instructions on how to upgrade.

Upgrade instruction

Before you upgrade

- Make sure to back-up your data before you start the upgrade as all data will be wiped in the process.

- Make sure there is more than 40% battery.

- Make sure there is at least 1.5GB free storage space on the phone or micro-SD card to download the software installation package.

- The whole process of installation will take some time, please do not do other operations or power off your device during the installation process.

Installation Steps

1. Download the software package which correlates your model (R9 Plus, R9 or F1s) to the phone storage’s (or SD card) root directory (ie not in any sub-folders).

2. Go to Files – All files – (click SD card if you have downloaded the package to SD card) – select the zip file – Click Update now. (Figures below are shown as an example of SD card).

3.       Your device will then reboot and display the progress of upgrade (see figure below), which will take some time.  Please do not do other operations or power off your device during the process.

4.     After the progress bar is complete, the phone will reboot and remain on the OPPO logo for 3 to 5 minutes. Please do not power off the device as this is normal. 

5.       Once the phone is fully booted up, the standard start-up guide will show up to setup the language, region and Wi-Fi.  Upon completion of the guide, please check Settings – Dual SIM and mobile network – Preferred network type, and make sure you have selected 4G/3G/2G (Auto) as Preferred network type.

6.       And by now, congratulations, you have successfully upgraded the software.